This is the quantity for which the component quantity is entered. This base quantity is used in the explosion of BOM at the time of MRP and costing. For example, you can define the explosion of assemblies with a special procurement key based on different criteria. MRP-4 as 1: In individual planning, this indicator is used to separately display component-dependent requirements. This indicator is useful for controlling dependent requirements planning when the primary product is planned with strategy 20, i.e. the MTO process. SAP treats each of the exploded levels in the same way as the top tier, calculating the net demand for those dependent levels, breaking down their respective BOMs (if the component is a material made by you), and planning them in the same way. – If you select an individual requirement, the system does not take into account the available stock and does not generate proposals for each individual requirement. You will also find PRs and scheduled orders with account assignment of the sales order (in the case of MD50). Once procurement proposals have been created, dimensioned, and planned, the next step in the SAP MRP algorithm is to break down the BOM for all levels below the appropriate header level.

Such a BOM explosion of all lower levels is only performed as part of single-element multi-level planning executions. In Customizing for Production, you define whether the following system activities occur by choosing BOM Item Data Set Resolution Types: The explosion type determines the procedure by which the BOM is exploded to determine dependent requirements. If the material to be planned is an in-house production material, the system also plans all dependent requirements as found in the assembly or subassembly BOM. If I insert the amount of XP per ton 1000 with an inherent process loss of 0.10%, would it appear in the order he expects 900? but the hardware requirements would be 1000 (I think from the zero loss ratio) is the ZLMV measures the quantity with or without the process loss through MRP uses probability of use and priority to create dependent requirements. The production order also creates reserves based on the probability of use. However, consumption is based on the policy defined in the alternate items group. Discontinuous material is a material that is replaced by its tracking material. We can keep abandoned items in both the SAP item bucket and the SAP BOM. BOM parameter Overrides the setting for saving item master files. MRP transfers dependent requirements to tracking hardware if discontinued components are no longer in stock or are not sufficiently in stock. If you set the individual flag for the header item and the dependent item, the system creates a scheduled order with reference to the sales order during MRP execution, and for the dependent item, the system schedules the dependent item based on sales orders.

The system does not take into account the stock of this sales order. The MARC-SBDKZ indicator determines whether individual or collective MRP planning is allowed for dependent requests, which means a low level in the nomenclature. b) If the selection is based on resolution data, it checks the BOM alternatives and the validity of the proxies in the OPPP transaction code. BOM explosion means the decomposition of an assembly from a higher level to lower-level components. The SAP system breaks down the assembly using its lower level codes. Subcodes are automatically assigned by the system when an item is linked to the BOM. If a part appears in multiple assembly BOMs at different levels, the system represents the lowest low-level code. The BOM Explosion 4 view in the material master record applies to the part listed as the product or part BOM, or to the material defined as a dependent request. The dependent demand is affected when the planned independent requirement (PIR) changes. If you choose 1 parameter, the item requirement for purchase is generated when a sales order has been entered under module SD (VA01). On the other hand, parameter 2 is used as parameter 1 in the BOM explosion of a product, but in the sales forecast basis (MD61).

To simplify, if the material is unique or uncommon, with a high value, with durability or short turnaround time, order proposals are only generated when a sales order has been received and entered into the system. Choose parameter 1, you have better control to manage inventory and values, parameter 2 is reversed if a material that is commonly used in many products that your company manufactures. And if you planned the product using the forecast or sales plan base, parameter 2 is your option to choose whether the sales forecast for a product for which the dependent demand or item was used suggests a purchase proposal for the item need, even if no sales order has yet been received or confirmed. If you define collective indicators for dependent materials, the system takes into account the stock for dependent materials. If you define collection requirements for the explosion, the quantities required for the item are summarized independently of the sales order. When you define individual resolution requirements, component-dependent requirements appear individually on the top-level low-level code. What is the relevance of the individual/collective needs indicator from a material perspective to the finished product and its assemblies in the case of inventory planning strategies? Thanks for the quick response. Do you have a «Inventory Determination Group» manual? Hello, how we will find the list of control cycles not maintained in relation to BOMs. If a t.code is available If the same part is considered both a header and a BOM element, the BOM is called a recursive BOM.

This case often occurs in the process industry as well as in the pharmaceutical industry. For example, let`s take an example below: SAP PP Tips SAP PP Tips and Production Planning/Control discussion forum. Debris produced during the conversion of a component into final assembly is called component debris. Waste components can be caused by any of the following causes: Materials available directly at machine sites, such as grease, washers, can be defined as bulk materials. For bulk solids:. Here, the final products are different, but have common or similar parts such as frames, saddles, etc. and a variant part. The selection or determination of a supply area is also carried out in the same order.

The supply area is equipped with a storage location. The coverage area is used in the following scenarios: Try the Zimbabwe Dairy Board – I implemented SAP-PP there in the late nineties. You will use SAP. In terms of training, I think you need to do training at SAP in South Africa. This field represents an alternate BOM if there are multiple BOMs for the part. Transaction CS02 is used to modify an existing SAP BOM. We can also use the CS20 transaction to modify multiple BOMs at the same time. This transaction allows us to: To select a valid BOM for the in-house manufactured item, the system switches to display MRP 4 of the material master record and checks the selection method entered for the BOM explosion: c) And if the selection is based on production versions, the system selects the production version according to the batch sizing and validity dates contained in the production versions. Finally, the BOM alternates and the task list contained in the version is used to run the MRP. How to add up for a new material the number of FG materials where no reference material is available Component waste can be entered both in the BOM and in a master material. Component scrap stored in a material master record applies to all BOM products.

If a different component rejection percentage is required for a particular product, it can be kept in the BOM. For FG inventory, you can assign the sales order to motion type 412E using MB1B. Welcome to the SAP BOM in SAP PP tutorial. This tutorial is part of our free SAP PP training. In this tutorial, we explain what BOM is in SAP, how to create it, what the different fields in BOM master data mean, and how to modify existing BOMs. Pl lets you know how to map a single child with multiple headers in Engineer Change Number in SAP. Based on the sort chain, the SAP system sorts the component display in report and PP transactions. In the MTO scenario, if you want to check the raw material inventory without restriction when you run MRP for the sales order.

Please check by specifying the individual/collective requirement as 2. Use code T CS15. A list of locations in use is displayed. With this T-code, you can find the next level and keep exploding until the last element or component appears. Here, the system only considers the percentage of transaction scrap entered here and no assembly scrap (if any) entered into a master item`s MRP view. The individual and collective indicator plays an important role in the MRP. This number is assigned internally by the system. The system uses it to link with transaction data and other PP applications such as MRP, production order, etc.

Is there a way to add an alternative «production warehouse» – (psl). I have equipment that is in two different places. For me, it would be great if psl A had 0 in stock and then looked for the system for stock at psl B. a) If the selection method is based on the quote quantity (order quantity), it includes a BOM whose defined lot sizes and time validities are within the proposed order quantity.